< Return to previous screen

Wood Veneer

Wood Veneer

Detailed description

With over 25 years of experience in the supply of realwood veneer edging to the furniture industries, Hallmark Fraulo offer our customer's a high quality range of popular wood species suitable for use on modern furniture, traditional furniture & DIY applications. Available in either pre-glued or unglued (AUTO) versions for use by hand or machine applications.

Advantages

  • 0.6mm thick x 50m continuous coils.
  • Shrink wrapped.
  • 30g fleeced backing minimises splitting & cracking.
  • Flexible.
  • High quality hotmelt adhesives system.
  • Pre-sanded veneer face.
  • FSC sourced & certified.
  • Main stock widths include 22mm - 30mm - 50mm

Species

  • Ash
  • American White Oak
  • White & Steamed Beech
  • Cherry
  • Maple
  • American Black Walnut
  • Teak
  • Sapele
  • Wenge new 2011
  • Zebrano new 2011

During 2011 we have added more of the modern veneer edgings such a Wenge & Zebrano to our stock range, as the demand increases for readily available iron-on versions of these species from designers & furniture makers. We can also arrange the supply of any species of wood veneer (subject to a minimum order quantity) - more details available from our Sales Department.

Technical specification

As mentioned earlier, the modern manufacturing techniques allow us to be able to supply 50m continuous coils to our customers, producing a seamless edging tape. Extremely durable hotmelt adhesives enable fast meltdown & rapid setting improving production output. 30g fleeced backing helps minimise splitting & cracking of veneers during application and offers flexibility around curved edges.

All coils can be applied by hand using a domestic iron or bench-mounted machine (hot-air) or in the case of un-glued versions on a traditional automatic edgebanding machine.

How to use

  • Ensure substrates are clean & free from dust.
  • All substrates are at room temperature.
  • Set iron to required temperature.
  • Protect face of veneer with cotton cloth or similar material during heating.
  • Overlap edging on board to allow for trimming.
  • Apply firm pressure over surface.
  • Move iron back & forth over surface.
  • Observe squeeze out of glue on edge
  • Allow minimum of 5 minutes curing before trimming.

For hand-held trimmers or router trimmers see our Lamello accessory section.

Suited for

  • Edgebanding
  • DIY Veneering